Stainless steel cable ties 300mm x 8mm

Stainless Steel Cable Ties, the smooth strong cable ties from 4.5mm to 12mm wide

These 8mm x 300mm stainless steel cable ties have a smooth surface in contrast to the black and white tyraps. How do you close a stainless steel cable tie? Well, there's a ball in the head and as soon as the end of the cable tie is pushed through the head, the ball will block if you want to pull it back. You can pull further, but not back.

Due to the strong stainless steel, a 8mm wide cable tie has a tensile strength of 114KG.

The properties of stainless steel cable ties of 8mm x 300mm are:

• 76Tensile strength: 114 kg
• Stainless steel type: 304
• Temperature range: -80° C up to + 540° C

When do you use stainless steel Tyraps?

Stainless steel tyraps are used in many sectors, such as:

• Maritime sector
• Installation technology (air conditioning, solar)
• Automotive
• Chemical industry

How to use stainless steel Tyraps

You can process stainless steel cable ties fastest and easiest with cable tying pliers for stainless steel cable ties. To start, apply the stainless steel cable tie where it should be. Then pull the tyrap by hand as far as possible. Then you place the end of the cable tie in the pliers (the video shows how to do this exactly) and you start tightening the cable tie by squeezing the handle a little bit and releasing it. When the cable tie is tight enough, squeeze the handle all the way and the cable tie is cut.

Due to the smooth surface and the flat stainless steel material, tyrap plyers for nylon cable ties are not suitable.